We are a well-established firm that has made its presence in the industry, by manufacturing and supplying Rectangular Water Bath. The bath is double walled with an inner chamber made up of stainless steel and outside of mild steel with powder coating. It consists of a tubular heater, hydraulic thermostat, pilot light, draincock and a water level regulator. This bath is used in the laboratories to incubate samples in water maintained at a constant temperature. A glass window is provided on the front side for an easy inside view. Rectangular Water Bath can be supplied with or without stirring arrangement.
Technical Specification
Capacity | 250X6flask 250X9flask 250X12flask 250X18flask |
Platform Size (cm) | 30 X 20 30 X 30 40 X 30 60 X 30 |
Inner Chamber | Stainless Steel 304 quality. |
External | Mild Steel powder coated / Stainless Steel |
Range | Ambient +50 to 99 °C. |
Controller | Electronic Display Digital Temperature Controller. |
Sensor | PT-100 |
Accuracy | +0.1 °C. |
Uniformity | +0.1 °C. |
Heater | Special Type S.S. Tubular water Heaters |
Heat up time | 30 min. upto 90°C. without load from ambient. |
Shaking | Stroke Length 25 mm (Standard) |
RPM | 50 to 150 RPM |
Lotus Clamps | S.S. clamps having spring tension for holding flasks. |
Insulation | Glass Wool 50mm |
Top Lid | Pyramidal Shape Stainless Steel |
Capacity (Watts) | 1000 1500 2000 3000 |
Power Consumption | 4 amps 6 amps 8 amps 12 amps |
Net Weight (approx) | 25 kgs 30 kgs 35 kgs 45 kgs |
Electronic requirements | AC230V & 50 Hz cycle. |
Optional
Controller | Digital Temperature Controller with PT-100 type |
Safety Circuit | Electronic Low Water Level Cut Off Circuit. |
![]() |